Posts Tagged ‘LED Pull Out Kitchen Faucet’

Single Handle Chrome Centerset LED Pull Out Kitchen Faucet

28 Oct
Single Handle Chrome Centerset LED Pull Out Kitchen Faucet

Single Handle Chrome Centerset LED Pull Out Kitchen Faucet


Handle Single Handle
Finish Chrome
Installation Type Waterfall
Style LED Pull Out
Function Kitchen Faucet
Valve Type Ceramic Valve
Material Brass
Faucet Total Height 34.5 CM
Spout Height 25 CM
Spout Length 21.5 CM
Pull-out sprayer hose length 100 CM
Shipping Weight 3.7 kg
What’s in the box 1 x Faucet
2 x Flexible Tube
1 x Accessary Set
1 Installation Instruction
Package Dimension 48X27X6 CM


  • Special design high quality led faucet with three beatiful colors.
  • No Battery and electronic connection needed. There is a micromoto inside the faucet and it can supply power to the led light with the water flow supply power to itself.
  • Worked water pressure: 2 kilograms
  • Water flow automatically changes the color with the temperature changed .
  • LED turns green when under 28°C, turns blue when between 28°C – 38°C, turns red when between 38°C – 48°C and flashes when higher than 48°C.


  • It’s easy for you to install the faucet correctly even if you never install faucets before.
  • All of our faucets have been proved to be no-leak during lifetime due to the durable ceramic valves.
  • The service life of ceramic valve can attain to more than 600,000 times which allows our faucets to be used for a long time under 90 degree.
  • Each of our faucets has been performed with 1.6Mpa high water pressure test before delivery to ensure the absolute quality.

Image DetailsPlease kindly note image below is just for your reference.
Different faucets are shipped with different accessories.

A: Hose

B: Other accessories for fixture

Tools You Need for Installation

  • Adjustable wrench
  • Tape
  • Screwdriver
  • Flashlight

General Faucet Installation Instruction

Please kindly note that this is just a general instruction, each faucet you buy from us has installation instruction with details inside package.

Step 1: Position the Faucet

A: Begin installing your faucet by placing the gasket and faucet in position on the sink.

B: From under the sink, thread the plastic mounting nuts onto the faucet shanks. Be sure the large side of each plastic mounting nut is up.

C: From the top of the sink, check the faucet and gasket position.

D: From under the sink tighten the mounting nuts, making certain not to over-tighten which could damage the nuts and make them difficult to remove in the future.

Step 2: Attach the Water Supply Tubes

A: Wrap the threads of the water-supply valve with Teflon tape. Although most plumbers use only Teflon tape, some plumbing supply manufacturers also recommend using plumber’s putty.

B: Thread the water supply nut onto the shut-off valve. Tighten the nut with a wrench.

C: Wrap the threads on the faucet shank with Teflon tape, and then thread the water supply nut onto the faucet shank.

D: Tighten the nut with a wrench.

Step 3: Connect the Faucet Lift Rod

A-1: From the top of the sink, insert the lift-rod into the faucet.

A-2: From under the sink, make sure the pivot-rod is in the down position. Insert the lift-rod into the lift-rod strap. Tighten the screw.

B-1: From the top of the sink, make sure the lift-rod opens and closes the drain plug as desired.

B-2: Make any needed adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.

B-3: If you need to connect the lift-rod strap to the pivot rod, slide one end of the spring clip onto the pivot-rod.

B-4: Make sure that both the pivot -rod and the lift-rod are in the down position. Insert the pivot-rod in the closest hole in the lift-rod strap.

B-5: Slide the other end of the pivot-rod. Make sure the lift-rod opens and closes the drain plug as desired.

C-1: Make minor adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.

C-2: Make major adjustments by removing the spring clip and moving the pivot-rod to a different hole in the lift-rod strap.

Step 4: Flush the Faucet

A-1: Anytime you work on plumbing, filings, chips, and other debris can fall into the plumbing pipes.

A-2: This debris can damage the sealing surfaces inside the faucet and cause leaks.

A-3: Remove aerator and black sealing gasket above it.

A-4: Before turning on the water supply, make sure the faucet handles are open (on position) in order to remove the debris without causing damage.

B: Open both water supply valves under the sink.

C-1: Allow the water to run for 15 seconds.

C-2: Close the faucet handles (turn off).

D: Make sure any debris is cleaned from the aerator screen.

E: Replace the aerator.

Why choose faucet from

Quality & Guarantee

Our faucet supplier possesses of nearly 40 world-leading manufacturing and engineering, including the world-leading patented technology of faucet 360 degree revolving with non-limitation, non-resistance and maintenance-free, computer digital control cutting technique, single forming cutting technique, unfailing seamless welding technique, world-leading PVD vacuum plating technique to ensure the faucets can be durable.

We have been exporting our faucets to United States and European for more than 10 years, and we make OEM for famous brands all over the world. Now we use this opportunity to provide our customers with our best prices and highest quality.
The inspiration of our designers comes from their pursuit to high quality life. A perfect art is created by combining fashionable elements and humanistic art inspiration and after numerous negation of ego. We have been on the front rank of the industry in creating a special sanitary ware culture and leading a fashionable life tide. In this way, we have created a lot of artistic products of “stylish personality and quality life”.

How to select faucet?

Suitable Style

The Faucet should match the characteristics of washbasin, sink and bathtub. For example, a single-hole faucet fit single-hole washbasin, and a center set faucet fit center set washbasin.

Proper Function

According to different purposes of the faucets, there are faucets for washbasin, bathtub, shower and sink. According to different functions of the faucets, there are hot/cold faucets, pressure-balanced faucets, thermostatic faucets and electrical sensor faucets.

Fine Finish

A well chrome-plated faucet looks dignified and with a little verdant color, when it looks pale, the plating density is not up to standard, when touched by hand or eye-observed, there must be no scratches, sand holes and oxidized spots. Our faucets have been proved to meet high requirement of United States and European chrome-plating standard.

Operation Inspection

Handles must be smooth and easy to operate for high-quality faucets. There shall be no sticking and tightness under the proper movement of the faucet handles. Each part must be tightly assembled.


It is the heart of the faucet. A good Valve guarantees endurance of 500,000 cycles even under using condition with unstable water pressure. Most of our faucets use ceramic valves which can attain to more than 600,000 cycles.

For more information, please feel free to visit our website:

Posted in Household